MAXX Model ICS CNC Hopup Chamber MI – SPORT w/ Tracer

£75

MAXX Model CNC Aluminum Hopup Chamber MI – SPORT with Tracer

PRODUCT INFORMATION
CNC Aluminum Hopup Chamber MI Sport (with BB Catching System) & UV LED Tracer unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series.
The Hopup Chamber MI unit has a precision rotary dial design for fine hop up adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber MI unit is designed to accept ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm, and also fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber MI Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in centre of housing to ensure the hop up unit is exactly centred, straight and air tight at all times when adapted to stock gearbox or any V2 gearboxes with 11.5mm or 12mm inner bore.
More than that, the Hopup Chamber MI Sport unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine.
The Dual UV LED Boards and Module set is also included with this hopup chamber unit to glow BBs in the dark. Operating Voltage from 7VDC – 15VDC (2-4 cells LiPo, 6-13 cells NiCad).

***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)

***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!

Includes
1 x CNC Aluminum Hopup Chamber MI Sport (with BB Catching System) unit

1 x Dual UV LED Boards and Module set

2 x Strong Clear Vinyl Cover set

1 x CNC Aluminum Standard-Hop Arm

1 x CNC Aluminum R-Hop Arm

1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper

1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub

1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring

Specification

Overall Length: 51mm

Overall Height: 38.5mm

Hub Outer Diameter (to fit into Gear Box): min 11.5mm – max 12mm

Hub Outer Diameter (to fit into Outer Barrel): min 12mm

Hub Inner Diameter (to fit Nozzle): max 8.3mm

Feeder Outer Diameter (to fit magazine): min 9.25mm

Feeder Length (to fit magazine): max 6.25mm

Material: Aluminum 6061

Features
Machined from a solid aircraft aluminium block with tight tolerances to provide better accuracy, consistency, and durability

Improved accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series

Precision rotary dial design for fine hopup adjustments

Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot

Removable Brass Threaded Slot Pin for setup and maintenance

Compatible with ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm

Fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs

Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting

Equipped with 3 compression springs on top, at bottom and in centre of housing to ensure the hopup unit is exactly centered, straight and air tight

Compatible with stock gear box or any V2 gear boxes with 11.5mm or 12mm bore

Specially designed with BB Latching System to prevent dropping BBs after removing the magazine

Included the Dual UV LED Boards and Module set to glow BBs in the dark.
Operating Voltage from 7VDC – 15VDC (2-4 cells LiPo, 6-13 cells NiCad)

The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!